Kompozitní
Quick info
MELOVY - ABS+GF Yellow 1.75mm / 1000g
In stock
68,04 € excl. VAT
82,33 € incl. VAT
82,33 € incl. VAT
MELOVY Filament - ABS+GF Yellow 1.75mm / 1000g
Quick info
Prusament PETG carbon Fiber Black 1kg
In stock
51,15 € excl. VAT
61,89 € incl. VAT
61,89 € incl. VAT
This PETG was manufactured directly at Prusa Research.
This 1.75mm filament was manufactured with an accuracy of +- 0.02mm
Quick info
Prusament PC Blend Carbon Fiber Black 800g
Dodání do 3-4 týdnů
58,35 € excl. VAT
70,60 € incl. VAT
70,60 € incl. VAT
Prusament PC Blend Carbon Fiber (PCCF) is a PC Blend filled with carbon fiber to improve strength, stiffness and temperature resistance.…
Quick info
Doporučujeme
BAMBU LAB PA6-CF Carbon Fiber Reinforced PA6 (Nylon 6) 1000g/1.75mm
In stock
90,26 € excl. VAT
109,21 € incl. VAT
109,21 € incl. VAT
BAMBU LAB PA6-CF Carbon Fiber Reinforced PA6 (Nylon 6) 1000g/1.75mm
Quick info
EXTRUDR - ASA DuraPro CF 1.75 mm (750 g)
In stock at the supplier within a week
52,52 € excl. VAT
63,55 € incl. VAT
63,55 € incl. VAT
Print speed: 40-60 mm/s
Nozzle temperature: 240-260 deg. C
Heatbed temperature : 110 st. C
rAL colour: RAL9017carbon
DuraPro ASA CF
Quick info
CarbonX™ - ezPC+CF
Není skladem
111,40 € excl. VAT
134,79 € incl. VAT
134,79 € incl. VAT
Filament - polycarbonate with carbon fibre CarbonX™ ezPC+CF
Quick info
EXTRUDR - TPU FLEX HARD CF 1.75 mm (0.5 kg)
In stock at the supplier within a week
52,40 € excl. VAT
63,40 € incl. VAT
63,40 € incl. VAT
Print speed: 20-40 mm/s
Nozzle temperature: 230-260 deg. C
Heatbed temperature : 50-60 deg. C
Quick info
EXTRUDR - TPU FLEX HARD CF 1.75 mm (2 kg)
In stock at the supplier within a week
209,32 € excl. VAT
253,28 € incl. VAT
253,28 € incl. VAT
Print speed: 20-40 mm/s
Nozzle temperature: 230-260 deg. C
Heatbed temperature : 50-60 deg. C
Quick info
BAMBU Lab PAHT-CF Carbon Fiber Reinforced High Temperature Nylon 1kg BLACK rolls up
In stock at the supplier within a week
103,26 € excl. VAT
124,94 € incl. VAT
124,94 € incl. VAT
BAMBU Lab Filament PAHT-CF Carbon Fiber Reinforced High Temperature Nylon 1kg BLACK with bobbin
Quick info
FILAMENT-PM, PET-G CFJet Carbon, 1.75mm, 0.5Kg - 20% carbon fiber, black mat
In stock
27,92 € excl. VAT
33,78 € incl. VAT
33,78 € incl. VAT
CFJet is a PETG-based material containing 20% carbon fibre, which gives it higher strength and stiffness than conventional PETG. It is…
FDM 3D tisk, problémy s tiskem první vrstvy
Při FDM (Fused Deposition Modeling) tisku je kvalitní první vrstva klíčová pro úspěšný tisk. Níže naleznete strukturovaný seznam problémů spojených s tiskem první vrstvy a možná řešení: