3DLAC 3D Varnish spray 400 ml, Accessories for 3D printers - fixing varnish

If you need a product to easily fix your printed filament to the substrate, then Spray 3DLAC is the right product for you. It is used to increase the surface adhesion of 3D printers with a heated substrate. The 400 ml pack is enough for 300 - 400 applications depending on the size of the pad, and the varnish is free of unpleasant odour and perfume. Spray on the pad from a distance of 20 cm, the surface is not sticky after the paint dries. Once the pad is heated, it perfectly adheres the first layer of print to the glass. When you're done printing, let the pad cool and then easily remove your print without tools or force. ABS products separate themselves from the pad by shrinking the material. Tested for PLA, PET, ABS, ASA, Flexfill, Wood and Bronze fill, NGEN, XT, XT-CF20 etc.

Key features of 3DLAC spray, 400 ml

• Used to fix the printed filament to the substrate
• Increases surface adhesion for 3D printers with heated pads
• 3DLAC spray lasts for 300 - 400 applications
• Odourless and perfume-free
• Once the pad has cooled, you can easily remove your print
• Unique 3DLAC spray replaces other fixatives used
  

Use:
Spray the lacquer on the mat from a distance of 20 cm. Once the pad is heated, the print is adhered to the glass. After printing, allow the pad to cool below 30°C and then you can easily remove the printout.

Notice:
The container is under pressure and its contents are flammable! Please follow the instructions on the product label when working.

Ingredients:
ISOPROPYL, ALCOHOL, MERHYAL, ISOBUTANE, PROPANE, VP/COPOLYMER, ALCOHOLDENATE. This product does not contain PBT/vPvB ingredients.