Adhesive layer - Devil Design glue for 3D printing - 110ml, ABS, ASA, HIPS, PLA, PET-G, TPU
Adhesive layer - Devil Design glue for 3D printing - 110ml, ABS, ASA, HIPS, PLA, PET-G, TPU
An adhesive coating is a transparent adhesive in the form of a liquid substance that is used to increase the adhesion of the print to the 3D printer table. Designed for materials ABS, ASA, HIPS, PLA, PET-G, TPU. For use on glass or aluminium or steel plates. More
Product code: 57375 Shipping and Payment
An adhesive coating is a transparent adhesive in the form of a liquid substance that is used to increase the adhesion of the print to the 3D printer table. Designed for materials ABS, ASA, HIPS, PLA, PET-G, TPU. For use on glass or aluminium or steel plates. More
Product code: 57375 Shipping and Payment
Product description:3D Printing Adhesive Coating - 110ml
An adhesive coating is a transparent adhesive in the form of a liquid substance that is used to increase the adhesion of the print to the 3D printer table. It forms a coating that increases the adhesion between the table and the fiber. Designed for ABS, ASA, HIPS, PLA, PET-G, TPU, PC, PCCF etc. For use on glass or aluminium or steel tables.
Adhesion - this is the bonding of the surface layers of physical bodies or phases (solid/liquid).
Method of use
Apply a thin layer of adhesive to the cold printer.
Preheat the table to the correct operating temperature.
Wait for the glue to dry for about 2 to 3 minutes.
After the 3D print is complete, wait until the bed and print have cooled to room temperature. The printed object should be carefully pried out with a spatula.
Print plate operating temperature range for use 20 - 120 StC