Anycubic - Normal UV Resin Black 1kg

Many consumers prefer Anycubic's standard UV resin because it ensures the strength of the mouldings and prevents excessive shrinkage, but also increases print speed, reduces curing time and maximises print efficiency on LCD machines.

Properties:
Main material: monomer resin and photoinitiator
UV wavelength 365-410 nm
Lower exposure time (s) 20-60 s, normal exposure time (s) 5-15 s

Normal UV resin
The material is strong and tough. Thick material in a blade model can easily lead to shattering of the model, but too flexible material will be prone to tensile deformation or breakage of the print details, which will affect molding accuracy and aesthetics. The resin is stable in a variety of climatic conditions and is also easy to store, overcoming the shortcomings of other resins that easily soften due to moisture and corrode in the environment.

Professional resin for moulding LCD displays
The optimization of LCD formation with weak light source and printing efficiency is higher than DLP/LCD/SLA compatible resin in the market. The resin is for LCD resin model only, not recommended for DLP or SLA machine. This resin ensures the strength of moulded parts and not excessive shrinkage, but also improves printing speed, reduces curing time and maximizes the printing efficiency of LCD machines.

Strong adhesion and easy separation
Not only the high printing success rate and accuracy, but also the minimal resin release force and adhesion, so that the model attached to the forming platform can be easily tipped, and the low viscosity makes it easy to clean the machine and model.

Storage method:

Store away from light at room temperature (sunlight contains large amounts of UV radiation which causes the light-sensitive resin to harden. After testing, it is not affected unless it is UV light).
It is recommended to store at an ambient temperature of 15 ? -35 ?, the lower the temperature, the higher the viscosity of the resin. Closed storage, excessive dust or humidity can affect print quality. Sunlight contains a large amount of UV radiation and solidifies the light-sensitive resin.
Use: If the photosensitive photosensitive material is in violation of the law, it must be used:

1. Shake the resin well before use, prohibit the use of resin in places where there is a lot of sunlight.
2. Wear gloves before use to avoid direct skin contact and keep the room ventilated.
3. In case of unintentional contact, use plenty of water to rinse as soon as possible. If you do not feel well, seek medical help in time.
4. Printed models should be cleaned with a high concentration alcohol of about 30S (recommended concentration 95% or more, the higher the better).
5. Do not pour the resin in the resin vat into the unused resin, do not leave the resin in the resin vat for a long time without use, so that the resin contamination will not affect the printing effect (long time without resin can be introduced into airtight containers or sealed with plastic film shading to save).
6. The resin has a shelf life of up to 18 months.