AURAPOL ASA 3D Filament Graphite Black 2000g 1.75mm bulk

Graphite_black
Graphite_black
Add to favourites Add to compare list

AURAPOL ASA 3D Filament Graphite Black 2000g 1.75mm bulk

ASA filament for 3D printers
Acrylonitrile-styrene-acrylate (ASA) is an excellent alternative to ABS.
The material has been specially developed to be more weather resistant as an alternative to ABS. ASA 3D filament is a filament for 3D printers that is strong, rigid and relatively easy to print. The material is also very resistant to chemical influences and heat. ASA also has less deformation than ABS, but the material should not cool too much when printed. More

Manufacturer: AURAPOL s.r.o.Product code: 57195 Shipping and Payment

46,87 € excl. VAT (56,71 € incl. VAT)
In stock
ks

ASA filament for 3D printers
Acrylonitrile-styrene-acrylate (ASA) is an excellent alternative to ABS.
The material has been specially developed to be more weather resistant as an alternative to ABS. ASA 3D filament is a filament for 3D printers that is strong, rigid and relatively easy to print. The material is also very resistant to chemical influences and heat. ASA also has less deformation than ABS, but the material should not cool too much when printed. More

Manufacturer: AURAPOL s.r.o.Product code: 57195 Shipping and Payment

Characteristic features

  • UV and weather resistance
  • Optimized for FDM(FFF) 3D printers
  • Excellent grip on heated plate, Kapton, BuildTak, glass, etc.
  • Low shrinkage compared to ABS
  • Perfect adhesion of layers
  • Easy removal of supports
  • High thermal stability
  • Printing difficulty slightly higher than PLA or PET-G.
  • Generally easier to print compared to ABS.
  • Potentially hazardous fumes are produced during printing as ASA contains styrene
  • Can be glued and smoothed with acetone

The material has a high adhesion to the substrate. Therefore, it is advisable to use, for example, a comb or hairspray as a separator.
Larger objects should be printed in a closed box to ensure slower cooling of the printout. This prevents rapid shrinkage and possible cracking of the layers.

  • Recommended temperatures refer to printing with a 0.4mm nozzle and a speed of approximately 60mm/s
  • For higher speeds, the temperature needs to be increased adequately.
  • For a nozzle with a larger diameter of 0.6 or more, the temperature needs to be raised to allow the plastic to melt.
  • For a larger object it is also possible to increase the temperature slightly.
  • This also applies in reverse, lower speed, smaller nozzle, smaller object = lower hotend temperature
  • Cooling 0-30%. It is better not to cool a larger object at all.

TIP:

If you have difficulty removing the printout from the backing, place the printout and backing in the refrigerator or freezer. If it cannot be removed even then, place it in lukewarm water. The procedure can be repeated.
When removing "forcibly" the pad can be damaged!!!

Our ASA is optimized for the print profile "Prusament ASA".

Filament parameters:

  • Print string weight 850 g
  • Print string length approx. 340 m
  • Diameter 1,75 mm + - 0,02 mm
  • Printing temperature 255-265 C
  • Pad temperature 105-115 C
  • The spool with the printing string is vacuum packed.

Dimensions of the filament spool:

  • Weight of empty coil 250gr (transparent)
  • Weight of empty coil 220gr (black)
  • Outer diameter 200 mm
  • Shaft hole diameter 55 mm
  • Coil width 70 mm
  • Filament packing dimensions (box): 80 x 230 x 200 mm

Made in Czech Republic.
This product is made of virgin granulate.
It does not contain recyclate or other undesirable impurities.


Download
Datasheet (pdf, 46.4 kB)