AURAPOL PLA 3D Filament Body color 1 kg 1.75 mm

Distinguishing features:

• Optimized for FDM(FFF) 3D printers
• Almost zero shrinkage on cooling
• Perfect adhesion of layers
• Very easy printing
• Can be glued with conventional adhesives
• Easily print even small and detailed objects
• No odour when printing
• The material is hard and strong
• Biodegradable
• Great for beginners
• Excellent for prototyping
• May be heat sensitive
• Tough and fragile
• Not flexible compared to other fibres

Overall, PLA filament is one of the best filaments to work with: it is not sensitive to temperature changes, has excellent surface quality and is ideal for printing complex objects. This material is very popular because it is easy to print and affordable. It is a great material for beginners and advanced. PLA fibre requires storage in dry conditions and out of sunlight. PLA readily absorbs water, which means it can become brittle over time if stored in a humid environment. It can also deform easily if too much heat is applied to it.

PLA filament is commonly used to create intricate parts and details, including corners, sharp parts and small components. It is often used to create architectural models, aesthetic and conceptual models and casting forms.

In general, this material is very popular for prototyping. Because it is usually priced lower than most other materials, manufacturers and developers can test different prototypes without a large investment. It is also biodegradable, which means you can reduce your impact on the environment.

Advantages of PLA fibres

PLA is also relatively easy to paint, it is advisable to use a primer. It is the most commonly used material for printing when someone wants to add additional colour to the model.

Note

The material can also be printed on a pad that is not heated. Nevertheless, we recommend (especially for beginners) to set the heating to 55-60C. The pad must be thoroughly degreased. For example, wash several times with hot spring water. You can also use kores glue sticks on the backing. 3Dlac works well. The material should be stored in a dry place. The wetted filament should be dried at a temperature of 45 to 50C for at least 6 hours.

Our PLA is optimized for the "Prusament PLA" print profile.

Parametry

• String weight 1000 g
• Length approx. 340 m
• Diameter 1,75 mm + - 0,02 mm
• Printing temperature 210-230 C
• Pad temperature 40-60 C
• The spool of string is vacuum packed
• Made in the Czech Republic

Coil dimensions

• Weight of empty coil 250gr (transparent)
• Weight of empty coil 220gr (black)
• Outer diameter 200 mm
• Shaft hole diameter 55 mm
• Coil width 70 mm
• Package dimensions (box): 80 x 230 x 200 mm

Made in Czech Republic.
This product is made of virgin granulate.
It does not contain recyclate or other undesirable impurities.