Bambu Lab - Bambu Textured PEI Plate
Bambu Lab - Bambu Textured PEI Plate
Bambu Textured PEI Plate More
Manufacturer: Bambu Lab EUProduct code: 57657 Shipping and Payment
Recommended settings
Please note that slicer settings may need to be adjusted based on the printer and filament used
| Material | Heatbed temperature | The need for taping? | Top glass removed? |
| PLA/PLA-CF/PLA-GF |
45~60°C |
No | Yes |
| ABS | 90~100°C | No | No |
| PETG | 60~80°C | No | No |
| PETG-CF | 70~100°C | No | No |
| TPU | 35~45°C | Yes | Yes |
| ASA | 90~100°C | No | No |
| PVA | 45~60°C | No | Yes |
| PC/PC-CF | 90~110°C | Yes | No |
| PA/PA-CF/PAHT-CF | 90~110°C | Yes | No |
Excellent first coat adhesion, increased durability
Spontaneous release after cooling
PEI is an excellent material for 3D printing applications due to its ability to withstand repeated heating and cooling cycles of the printer's heatbed. Prints are easily removed when the heating pad temperature reaches room temperature, and we always recommend waiting until it reaches 35°C or below. If the print still sticks to the plate, simply bend the steel plate and the model will fall right into your hands.
Compatibility with different materials
PEI allows printing not only common materials such as PLA, TPU and PETG, but also materials that require high temperatures such as ABS and Nylon.
Prevent bending with reliable magnetic adhesion
The Bambu Texture PEI plate is equipped with a 0.5mm thick stainless steel plate to increase magnetic adhesion. This helps prevent warping and ensures optimal print quality during 3D printing, reducing the likelihood of first layer separation due to warping. It also helps when printing larger models in materials that are prone to deformation such as ABS, PC and Nylon.
Textured finish
Bambu Texture PEI Plate offers a unique first layer surface. Through the application of a powder coating process, this PEI Build Plate creates a rough texture that adds texture to your prints.
Installation steps
Step 1: Align the rig's fixed point label with the label name facing you
Step 2: Lower the board and secure it to the magnetic platform
Product Specifications
| Materials |
PEI powder coated + 301SEH stainless steel plate |
|
Surface temperature resistance |
Up to 180°C |
| Thickness of flexible steel plate |
0.5 mm |
|
PEI layer thickness |
0.075 mm |
|
Usable area |
256*256 mm |
|
Package size |
300*270*17 mm |
|
Package weight |
450 g |
|
Color |
Golden |
Please read carefully
First layer inspection is also not supported by the PEI board due to the print surface structure.
Automatic calibration for flow rate is not recommended as the LIDAR will have difficulty reading the print area correctly and the calibration may be affected
Regularly clean the print surface with dish soap and hot water to remove any dust or grease that may cause poor adhesion. IPA can also work, but the best solution for cleaning the plate is to wash it to ensure the best performance.
Do not clean textured PEI with acetone as it will damage the PEI surface.
Always wait a few minutes for the plate to cool before removing printed models so that the print can be easily removed. This prevents damage to the plate and ensures a long product life.
A PEI textured board is considered a consumable part that will deteriorate over time. The warranty covers only manufacturing defects, not cosmetic damage such as scratches, dents or cracks. Defective sheets on delivery are the only ones covered under warranty.