Bambu Lab - Liquid Glue for Build Plate ( PLA/ABS/PETG )

Liquid_glue_for_build_plate
Liquid_glue_for_build_plate
Add to favourites Add to compare list

Bambu Lab - Liquid Glue for Build Plate ( PLA/ABS/PETG )

Bambu Lab's liquid adhesive is an adhesive specifically developed for 3D printing, suitable for printing materials such as PLA, ABS and PETG on suitable surfaces including cold plate, high temperature plate and textured PEI plate. Using Bambu Lab liquid glue, constant adhesion is maintained without fear of models falling off or deforming. More

Manufacturer: Bambu Lab EUProduct code: 57778 Shipping and Payment

23,50 € excl. VAT (28,44 € incl. VAT)
In stock
ks

Bambu Lab's liquid adhesive is an adhesive specifically developed for 3D printing, suitable for printing materials such as PLA, ABS and PETG on suitable surfaces including cold plate, high temperature plate and textured PEI plate. Using Bambu Lab liquid glue, constant adhesion is maintained without fear of models falling off or deforming. More

Manufacturer: Bambu Lab EUProduct code: 57778 Shipping and Payment

Properties


  • Excellent adhesion: Excellent adhesion: prevent printing errors by ensuring that models adhere perfectly to the printing surface. Bambu Lab Liquid Glue also makes it easy to remove prints from the plate when finished.

  • Bambu Lab liquid adhesive can be easily cleaned from the print surface and models. Compared to glue sticks, liquid glue leaves less residue on the printing surface and the printed model and is easier to clean.


  • Compared to glue sticks, Bambu Lab Liquid Glue is easier to apply evenly on the building surface

  • The ingredients are environmentally friendly and harmless to the human body, with a lower odour compared to other adhesives

    • Recommended settings

    Material Hotbed temperature
    PLA 40~60°C
    ABS 90~100°C
    PETG 60~80°C
    PET 80~100°C
    TPU 30~45°C
    ASA 90~100°C

    Directions

    Open the internal valve by applying pressure to the applicator head; then apply the adhesive evenly to the print area. After printing, simply clean the printing plate and the bottom of the model with water.


    Attention


  • Suitable for filament types PLA, PETG, PET, ABS, ASA, TPU.

  • For maximum effectiveness, do not apply more than one coat.

  • Do not force the container too hard.

  • If the adhesion to any fibre is not sufficient, please increase the hotbed temperature accordingly.

    Product Specifications

    Lifetime 100 x(when covering the entire printing plate) Vessel volume 60 mL
    Package weight 80 g Package size 30*30*139.5 mm