Qidi Tech - X-Plus 3 3D Printer

- Higher speed 600mm/s
- Larger than larger 280*280*270 mm
- High flow rate 35mm3/s
- Acceleration 20000mm/s2

• New all-metal frame - Highly stable, reinforced frame with metal crossbars at the bottom. Resistant to deformation.
• Linear hollow axle made of high quality steel. Highly durable and does not require frequent maintenance. They usually last the life of the printer without needing to be replaced. Improved surface straightness and 60% less deviation.
• CoreXY structure. Reduce the inertia of movement and increase the speed of movement. Quiet drive TMC2209 with lower noise level.
• New cooling system - reducing the risk of clogging and ensuring smooth extrusion.
• 9.5:1 gear ratio - More stable, more powerful and faster extrusion.
• Two sets of hot end
  Copper alloy nozzle for better thermal conductivity, smooth printing and greater durability.
  Nozzle made of hardened steel for abrasive materials and long-term use.
  Maximum temperature 350 st. C for both nozzles
• Temperature-controlled chamber and drying heating device - Maximum temperature 65 deg. C. Chamber circulation fan with activated carbon air filter.
• High-efficiency printing of PET-CF, PAHT-CF, etc.
• No layer separation
• The higher the temperature in the heated chamber, the greater the range of material that can be printed. The heated chamber ensures that the model is printed evenly without creating internal stresses.
• Automatic plate alignment
• Klipper Adaptive Meshing and Purging, quickly ensuring a flawless first layer for every 3D print.
• Flexible HF Plate - Great adhesion, no warping problems, easy removal of printed models.
• Great user experience - The highly acclaimed QIDI slicer software has both a normal mode and an expert mode that is easy even for beginners! We also provide Fluidd Console.