Dual Channel CAN BUS Overlay for Raspberry Pi - Seeedstudio 103990563
Dual Channel CAN BUS Overlay for Raspberry Pi - Seeedstudio 103990563
Seeedstudio's shield for Raspberry Pi minicomputers. It supports the CAN FD interface with a baud rate of up to 8 Mbps, a faster and more efficient version of the traditional CAN interface. The shield is based on MCP2518 controller and MCP2557 transceiver. The device uses the SPI interface to communicate with the minicomputer. More
Manufacturer: BOTLAND B.DERKATZ SPOLKA JAWNAProduct code: 58007 Shipping and Payment
Seeedstudio's shield for Raspberry Pi minicomputers. It supports the CAN FD interface with a baud rate of up to 8 Mbps, a faster and more efficient version of the traditional CAN interface. The shield is based on MCP2518 controller and MCP2557 transceiver. The device uses the SPI interface to communicate with the minicomputer. More
Manufacturer: BOTLAND B.DERKATZ SPOLKA JAWNAProduct code: 58007 Shipping and Payment
Product description: dual channel CAN BUS overlay for Raspberry Pi - Seeedstudio 103990563
Shield by Seeedstudio for minicomputers Raspberry Pi. Supported by cAN FD interface with a transfer rate of up to 8 Mb/s , it is a faster and more efficient version of the traditional CAN interface. Shield is based on MCP2518 controller and MCP2557 transceiver. The device uses an interface to communicate with the minicomputer SPI. The shield can be powered using the Raspberry Pi's GPIO pins or via screw connectors using DC voltages ranging from 12 V to 24 V. The board also has connectors Grove, resistors 120 ? and switches to control their operation .
Main features of the module
- CAN FD support
- Data transfer speeds up to 8 Mbps
- Two Grove connectors
- The whole set can be powered with DC voltage from 12 V to 24 V using screw connectors
- Integrated 120 ? resistor with the ability to switch it on and off at any time
- Full compatibility with GPIO raspberry Pi connectors
Technical specifications
- Supply voltage:
- 5V via GPIO Raspberry
- 12 V to 24 V DC via screw connections
- Number of channels: 2
- Controller: MCP2518
- Transceiver: MCP2557FD
- Communication interface:SPI
The set includes the necessary fasteners and 2x40 goldpin strip.
TENSION FROM | 5,0 V |
PRESSURE DOWN | 24.0V |
INTERFACE UC - CAN | Yes |
WIDTH OF PACKAGING | 8 cm |
PACKING HEIGHT | 3 cm |
DUMB PACKAGING | 11.5 cm |
WEIGHT OF PACKAGING | 0.042 kg |