VEHO 600 PRO V2 Upgrade 3D Printer 600*600*600mm, CoreXY, Klipper, Wifi

A really "big" FDM 3D printer with a print volume of 216000 cm2 or 600x600x600 mm.

Introduction

The Tronxy VEHO 600 PRO V2 is an advanced 3D printer that combines a robust design, large print volume and advanced technologies such as CoreXY and Klipper firmware. This printer is designed for professional use and offers high print speed, accuracy and reliability.

Key features

Large print volume The Tronxy VEHO 600 PRO V2 offers an impressive print volume of 600 x 600 x 600 mm, allowing you to print large objects or multiple smaller objects at once.
CoreXY structure The printer uses the CoreXY structure, which is known for its stability and accuracy. This structure allows for a lightweight print head, which contributes to high print speed and accuracy.
Klipper firmware The Tronxy VEHO 600 PRO V2 is equipped with Klipper firmware, which allows remote control of the printer via a local network. The printer can be controlled from both a computer and a mobile phone, providing flexibility and convenience when printing.
Print speed Thanks to the combination of a lightweight print head and CoreXY structure, the printer achieves a maximum print speed of up to 300 mm/s. This is ideal for fast production of prototypes and large print jobs.
Heated Pad The printer is equipped with a silicone heated pad with fast and stable AC electric heating, making it easy to remove prints and ensuring their stability during printing.
Ultra-quiet motherboard The Tronxy VEHO 600 PRO V2 features an ultra-quiet motherboard with TMC2209 driver and STM32F446ZET6 main chip, ensuring a quiet and comfortable printing experience.
Automatic Print Reset In the event of an unexpected power failure, the printer automatically saves the print progress, allowing you to continue printing when power is restored without data loss.
Direct extruder drive The printer uses a direct extruder drive, which provides better control over the print material and enables printing of flexible filaments.

Technical specifications

Print volume: 600 x 600 x 600 mm
Maximum print speed: 300mm/s recommended around 100-150mm/s
Heated pad: Silicone, AC electric heating
Ultra-quiet motherboard with TMC2209 driver and STM32F446ZET6 chip
Firmware: Klipper
Structure: CoreXY
Extruder: Direct Drive

Conclusion

The Tronxy VEHO 600 PRO V2 is a powerful and reliable 3D printer that is ideal for professional use. With its large print volume, high print speed and advanced technologies such as CoreXY and Klipper firmware, it offers excellent performance and flexibility for a wide range of printing jobs.

The printer is supplied in multi-packs (approx. 65Kg) as a KIT for our more skilled customers. If you are interested, please contact us for a quote on completing the setup and handing over a fully functional printer.

Notice:

External dimensions of the Tronxy VEHO 600 PRO V2 is a large format 3D printer with a print volume of 600 x 600 x 600 mm. The external dimensions of the printer are approximately 960 x 960 x 1100 mm
.
Please note the problem with the door passage When planning the placement of the Tronxy VEHO 600 PRO V2, it is important to consider its large external dimensions. The standard door width in homes and offices is usually around 800 mm, which means that the printer may not pass through a normal door without disassembly or special handling.

Recommendations

Before installation: measure the width and height of the door that the printer will pass through and compare them with the external dimensions of the printer.
Disassembly: If the printer will not fit through the door, consider partially disassembling the printer to make it fit.
Alternative entrances: If possible, use wider entrances such as garage doors or bi-fold doors.
Professional help: If necessary, contact a professional moving service that is experienced in handling large and heavy items or consult with your dealer.

.
This will ensure that the installation of the Tronxy VEHO 600 PRO V2 is smooth and trouble-free.

Assembly (video Youtube.com)