Bambu Lab - Bambu High Temperature Plate (Smooth PEI) Combo
Bambu Lab - Bambu High Temperature Plate (Smooth PEI) Combo
Bambu High Temperature Plate (Smooth PEI) Combo
1x Bambu High Temperature Plate and 2x Bambu High Temperature sheet included More
Manufacturer: Bambu Lab EUProduct code: 57658 Shipping and Payment
Bambu High Temperature Plate (Smooth PEI) Combo
1x Bambu High Temperature Plate and 2x Bambu High Temperature sheet included More
Manufacturer: Bambu Lab EUProduct code: 57658 Shipping and Payment
Important information before use
Before automatic levelling, the nozzle must be wiped repeatedly in the special wiping area of the Engineering Plate to completely remove any residual material at the nozzle tip. The coating in the specially designed wiping area gradually wears off over time. This is normal and does not affect print quality or nozzle life, so you don't have to worry about quality issues.
Bambu Lab recommends using only official Bambu Lab adhesive on Cool Plate and cannot be held responsible for any damage caused to the plates due to the use of third party adhesive.
Overview
Bambu High-Temperature Plate leaves a smooth surface on the model that comes into contact with the high-temperature plate, and may require a little post-processing to clean up the adhesive
Recommended settings for Bambu High-Temperature Plate
Please note that slicer settings may need to be adjusted based on the printer and filament used
Material | Hotbed temperature | Need for adhesive | Top glass off? |
PLA/PLA-CF/PLA-GF | 45~60°C | Recommended | Yes |
ABS | 90~100°C | Recommended | No |
PETG | 70°C | Yes | No |
TPU | 35°C | Recommended | Yes |
ASA | 90~100°C | Recommended | No |
PVA | 45~60°C | Recommended | Yes |
PC/PC-CF | 100~110°C | Yes | No |
PA/PA-CF/PAHT-CF | 100~110°C | Yes | No |
Benefits
Works best with most 3D printing filaments
Works well with automatic calibration for flow and does not interfere with LIDAR
Smooth texture on the print surface
Excellent adhesion and easy print removal
Can be replaced by the user
Disadvantages
Cannot be used without heating the print area
May be more fragile compared to Engineering Plate or Textured PEI plate
For low glass transition temperature fibres, the top glass cover plate or front glass door must be opened
Recommended settings for Bambu Engineering Plate
Please note that slicer settings may need to be adjusted based on the printer and filament used
Material | Hotbed temperature | Need glue? | Removing the top glass? |
TPU | 30~35°C | Recommended | No |
PETG | 70~80°C | Recommended | Yes |
ABS | 100~110°C | Yes | No |
PC/PC-CF | 100~110°C | Yes | No |
PA/PA-CF/PATH-CF | 100~110°C | Yes | No |
Installation steps
Step 1: Align the rig's fixed point label with the label name facing you
Step 2: Lower the board and secure it to the magnetic platform
Product Specifications
Surface temperature resistance | Up to 200°C | Printable area | 256*256 mm |
Flexible steel thickness | 0.4 mm | Thickness of the high temperature plate | 0.3 mm |
Package weight | 320 g | Package size | 290*290*4 mm |
Overview
Bambu High-Temperature Sheet (Smooth PEI) is a replacement sheet for Bambu High-Temperature plate
Compatibility
X1 and P1 series
Notes
Bambu High-Temperature sheet is easy to replace and install.
After tearing off the original leaf, wipe the surface with alcohol. When applying a new sheet, make sure the surface remains dry.
You can use an anhydrous ethanol solution or an isopropanol solution with a concentration greater than 90% to wipe the plate.
You can also use detergent and water to clean the surface.
Before printing, it is also best to use a special strong glue (Glue Stick for Build Plate) to avoid damage when removing the model.