Bambu Lab - Bambu Cool Plate Combo
POZOR COOL PLATE JIŽ NENÍ V NABÍDCE A TATO DESKA JE JEN POUZE DESKA Z JEDNÉ STRANY COOL A Z JEDNE ENGINERING!!!
Bambu Lab - Bambu Cool Plate Combo
Bambu Cool Plate Combo
1x Bambu Cool Plate and 2x Bambu Cool sheet included More
Manufacturer: Bambu Lab EUProduct code: 57660 Shipping and Payment
Bambu Cool Plate Combo
1x Bambu Cool Plate and 2x Bambu Cool sheet included More
Manufacturer: Bambu Lab EUProduct code: 57660 Shipping and Payment
Important information before use
Before automatic levelling, the nozzle must be wiped repeatedly in the special wiping area of the Engineering Plate to completely remove any residual material at the nozzle tip. The coating in the specially designed wiping area gradually wears off over time. This is normal and does not affect print quality or nozzle life, so you don't have to worry about quality issues.
Bambu Lab recommends using only official Bambu Lab adhesive on Cool Plate and cannot be held responsible for any damage caused to the plates due to the use of third party adhesive.
Overview
-
Cool Plate is pre-adhered to the Bambu Flex Plate and 2x Cool Plate stickers are included
-
The Bambu Cool Plate is a sticker that is applied to the Bambu Engineering Plate. It is a consumable printing surface that is used in conjunction with a thin adhesive layer and works best for low heat deflection filaments
-
Bambu Cool Plate leaves a smooth surface on printed models that come into contact with Cool Plate and may require a little post-processing to clean up the adhesive.
-
Recommended settings for Bambu Cool Plate
Please note that slicer settings may need to be adjusted based on the printer and filament used
Material | Hotbed temperature | Need for adhesive | Top glass off? |
PLA/PLA-CF/PLA-GF | 35?~45? | Yes | No matter |
TPU | 30~35? | Yes | No matter |
PVA | 35~45? | Yes | No matter |
Benefits
Works best with low-temperature glass transition fibers because they can be used at low temperature for hotbed
Works well with automatic calibration for flow and does not interfere with LIDAR
Smooth texture on the print surface
Excellent adhesion and easy print removal
Can be replaced by the user
Disadvantages
Cannot be used without a glue stick as the surface can be easily damaged if glue is not used
Not recommended for high temperature materials as bubbles may form under the print surface and cause damage
May be more fragile compared to Engineering Plate or Textured PEI plate
Product Specifications
Surface temperature resistance | Up to 120? | Printable area | 256*256 mm |
Flexible steel thickness | 0.5 mm | Thickness of the high temperature plate | 0.4 mm |
Package weight | 320 g | Package size | 290*290*4 mm |
Recommended settings for Bambu Engineering Plate
Please note that slicer settings may need to be adjusted based on the printer and filament used
Material | Hotbed temperature | Need glue? | Removing the top glass? |
TPU | 30~35°C | Recommended | Ne |
PETG | 70~80°C | Recommended | Yes |
ABS | 100~110°C | Yes | Ne |
PC/PC-CF | 100~110°C | Yes | Ne |
PA/PA-CF/PATH-CF | 100~110°C | Yes | Ne |
Installation steps
Step 1: Align the rig's fixed point label with the label name facing you
Step 2: Lower the board and secure it to the magnetic platform