Bambu Lab - H2D 3D printer H2D AMS Combo / Standard /

Explore the capabilities with two jets

Print multiple materials
Flexible and strong, low-cost and exotic materials in one print.

Print multiple materials

Dedicated support material
Perfect supports with minimal waste, flushing and rewinding.

Efficient multi-colour printing
Fast and efficient multi-colour printing.

A complete solution for personal production

Laser
10W and 40W 455nm laser for engraving and cutting.

Digital cutting
Precision cutting on a variety of materials.

Pen drawing
Drawing and writing.

Live spatial alignment

What you see is what you get
The BirdsEye camera on the H2D printer, combined with computer vision algorithms, delivers top alignment accuracy down to 0.3 mm. This advanced spatial alignment allows users to place the toolpath in the right place on the material - truly "what you see is what you get. "*

Automatic alignment
Maximize material efficiency and minimize waste.
Utilizing real images from the BirdsEye camera, Bambu Suite automatically arranges your project according to the shape of the material, such as leftover plywood from a previous project. This feature helps you get the most out of every material.

Arrangement
No need to worry about safety - we've got it covered.

Safety windows for laser
Operate and monitor laser projects safely without the need for glasses, thanks to our safety windows.

Air cleaner
An optional air purifier ensures clean air, even during indoor laser operations.

Fully automatic calibration
One click initiates automated laser focus control and material measurement, eliminating manual adjustments.

Material CodeSync
H2D automatically scans the QR code on your material and loads the perfect preset.

Air assist
Improves surface quality by directing high-speed air into the laser path for cleaner, more accurate results.

Non-contact 3D mesh
Advanced optical height measurement creates a detailed 3D mesh without physical contact, enabling precise laser work on curved surfaces.

Go big, go fast, go precise

Our secret ally: the Vision Encoder
50µm ultra-fine motion precision*
The ultra-precise Vision Encoder board, combined with 5µm resolution optical measurements for tracking and correcting tool head movement, enables H2D to achieve consistent and reliable 50µm motion accuracy, independent of distance, across the entire workspace, an order of magnitude better than its predecessor. (*Vision Encoder sold separately)

Huge work zone
Get rid of size limitations
With print volumes up to 350mm × 320mm × 325mm*, creating large-scale projects has never been easier! From laser engraving on large objects to printing oversized models, the expanded capacity lets you bring your most ambitious ideas to life.

Hotend 350 deg.C and chamber heating to 65 deg.C
Unlock the full potential of high-performance materials
With active chamber heating to 65°C and a high-temperature hotend reaching up to 350°C, H2D provides precise closed-loop temperature control. This advanced system effectively eliminates warping and distortion in high performance materials, ensuring excellent layer bonding and maximizing their full potential.

A REAL high-flow hotend
Stable printing at 600 mm/s effortlessly
The H2D features a specially designed high-flow hotend that ensures reliable printing at high speeds of up to 600 mm/s. Designed for consistent performance, it eliminates flow limitations during printing, enabling continuous high-speed printing regardless of print size or complexity.

DynaSense Extruder
Intelligent sensors for precise extrusion control
Bambu Lab's proprietary PMSM servo architecture creates an intelligent extrusion control system. It performs 20kHz torque/resistance and position sampling for dynamic electromagnetic torque modulation. It stabilizes extrusion and detects filament wear and blockage.

Camera on nozzle
Monitor extrusion at the nozzle tip
The H2D is equipped with an AI-enabled camera on the nozzle and a macro lens. This intelligent monitoring system continuously monitors extrusion patterns, instantly detecting material build-up, filament deviations and extrusion failures.

AI pre-flight checklist
Peace of mind, every time you print
Before each run, the H2D visual system initiates a comprehensive preflight check.

1. Chamber Integrity Check - detecting debris throughout the print area.
2. Hardware Configuration Audit - instant recognition of nozzle dimensions and print plate characteristics.
3. Digital-Physical Alignment - automatic verification of consistency between detected hardware specifications and active slicer parameters.

SOTA filament monitoring
15 sensors per filament path
Unlike legacy systems with filament failure detectors, H2D offers comprehensive material flow monitoring. Along the entire path from the AMS to the nozzle, 15 strategic sensors form an intelligent network that continuously monitors five key parameters: feed rate, tension, filament tip location, extruder thermal regime and dynamic extrusion pressure. This creates an industry-leading filament behavior management system.

Product specification

Case Specification
FDM printing technology
Body Printing area (W*D*H) Single nozzle printing: 325*320*325 mm3
Double nozzle printing: 300*320*325 mm3
Total area for two nozzles: 350*320*325 mm3
Chassis and box Aluminium, steel, plastic and glass
Safety glass for laser Installed on the Laser edition, the basic H2D printer can be upgraded with the Laser Upgrade Kit.
Air pump assistance Installed on Laser edition, the basic H2D printer can be upgraded with the Laser Upgrade Kit.
Dimensions and Weight Physical dimensions 492*514*626mm3 (Package size:620*620*755mm3)
Weight 31 kg
(Gross weight:H2D: 38.5 kg; H2D AMS Combo: 42.3 kg;
H2D Laser Full Combo: 46.2 kg)
Hotend printhead Allokov
Extruder gears Hardened steel
Nozzle Hardened steel
Maximum nozzle temperature 350 deg. C
Diameter of nozzle supplied 0.4 mm
Supported nozzle diameters 0.2 mm, 0.4 mm, 0.6 mm, 0.8 mm
Filament diameter 1.75 mm

Package contents

H2D AMS Combo H2D Laser Full Combo
Bambu Lab H2D YES - YES
Bambu Lab H2D Laser Edition - YES -
Printing plate YES YES YES
Coil Holder YES YES YES
Accessory box YES YES YES
AMS 2 Pro YES YES -
10W Laser Module - Depending on the Combo selected -
40W laser module - Depending on the selected Combo -
Cutter module (with pen holder) - YES -
Laser plate - YES -
Cutter plate - YES -
Security key YES YES YES
Ventilation tube - YES -
Materials for laser and cutter - YES -
Safety STOP button - YES -

Video head replacement:

https://drive.google.com/file/d/1hKujBANVHHGaiaNrSr7KDryRdGlEoHn9/view?usp=sharing