Dry lubricant with PTFE spray, moving parts of 3D printer machines, etc.
Dry lubricant with PTFE spray, moving parts of 3D printer machines, etc.
Dry lubricant with PTFE spray, moving parts of 3D printer machines, etc. More
Product code: 57730 Shipping and Payment
Dry lubricant with PTFE spray, moving parts of 3D printer machines, etc. More
Product code: 57730 Shipping and Payment
Description
- Dry lubrication, does not cause dust and dust accumulation
- Eliminates squeaking, cracking and allows smooth movement
- Permanent protection against wear
- Layer thickness 10 µm
- It can be used for precision mechanics requiring the tightest tolerances
- Very high resistance
Temperature resistance from -180 °C to +260 °C (temporary)
Permanently resistant to water, acids and alkalis
Contains no mineral oil
Silicone-free
Scope of application
Transparent, dirt-resistant dry lubricant for light to medium loads.
Instructions
Shake briefly before each use. Spray a thin layer on the rubbing or bonding points and allow to dry, drying time for thin layer: approx. 1-2 min, drying time for thicker layer: approx. 5 min.
Chemical base: polytetrafluoroethylene
Colour: Milk transparent (protective film)
Density: 0.6 g/cm3
Odour: Characteristic
Application temperature min.: -180°C
Application temperature max.: 260°C
Boiling point: -44 °C
Concentration of volatile organic compounds (CH): 588,66 g/l
No silicone: Yes
Acid-free: yes
Without resin: Yes
Mineral oil free: yes
AOX Free: Yes
Content: 300 ml
Vessel: Aerosol
Durability from manufacture: 24 months