ESP ESP32-S3 CAM WiFi Bluetooth development board module onboard ESP32-S3 N16R8 dual TYPE-

Product features:

1. ESP32-S3 is designed based on the ESP32 S3-1 module with an integrated PCB antenna.

2. The ESP32-S3 development board can be equipped with two optional cameras: OV2640/OV5640.

3. ESP32-S3 is a low-power system on chip (SoC) with integrated 2.4 GHz Wi-Fi wireless communication and low-power Bluetooth in dual mode.

4. ESP32-S3 has a complete Wi-Fi subsystem and low-energy Bluetooth subsystem with top-notch low-energy performance and RF performance, supports multiple low-energy working states, and can meet the power consumption requirements of various application scenarios.

5. The ESP32-S3 chip provides rich peripheral interfaces and has a number of unique hardware security mechanisms. The perfect security mechanism allows the chip to meet strict security requirements.

Performance parameters:

Controller: Dual-core 32-bit LX7 XtensaR processor, frequency up to 240 MHz

Storage:

384 KB ROM

512 KB SRAM

16 KB RTCSRAM

8 MB PSRAM

Operating voltage: 3 V to 3.6 V.

Up to 45 GPIO

2*12-bit ADC (up to 20 channels)

Communication interfaces:

2 12c interfaces

2 12s interfaces

4 SPI interfaces

3 UART interfaces

1 USB oTG interface.

Temperature range: -40 to 65 degrees Celsius

WiFi

Supports IEEE 802.11 b/g/n protocols

Supports 20 MHz and 40 MHz bandwidth in the 2.4 GHz band

Supports 1T1R mode with data rates up to 150 Mbps

Wireless Multimedia (WMM)

Frame aggregation (TX/RX A-MPDU, TX/RX A-MSDU)

Immediate block acknowledgment (ImmediateBlock ACK)

Fragmentation and defragmentation – Automatic beacon monitoring (hardware TSF) – 4× virtual Wi-Fi interfaces

Supports network infrastructure (lnfrastructure BSS) Station mode, SoftAP mode, and Station+ SoftAP promiscuous mode. Please note that when the ESP32-S3 scans in station mode, the SoftAP channel will change simultaneously

Antenna layout

802.11 mc FTM

Supports external power amplifier

Bluetooth:

Bluetooth LE: Bluetooth 5, Bluetoothmesh

High power mode (20 dBm, PA sharing with Wi-Fi)

Supports 125 Kbps, 500 Kbps, 1 Mbps, 2 Mbps.

Advertisement extension

Multiple advertisement sets

Channel selection algorithm No. 2

Simultaneous Wi-Fi and Bluetooth operation, sharing the same antenna

Advanced peripheral interfaces and sensors

45 xGPIO ports

Digital interfaces:

- 4xSPl

- 1xLCD interface (8-bit

- 16-bit parallel RGB, l8080, MOTO680), supports conversion between RGB565, YUV422, YUV420, YUV411

- 1xDVP8-bit~16-bit interface for camera

-3xUART

-2xl2C

- 2x 12S

- 1xRMT (TX/RX)

-1x pulse counter

-LED PWM controller, up to 8 channels

- 1x full-speed USB OTG

- 1 x USB serial/JTAG controller

- 2x MCPWM

- 1 x SDIO host interface with 2 card slots

- General DMA controller (GDMA), 5 receive channels and 5 transmit channels

- 1xTWAI controller, compatible with IS011898-1 (CAN 2.0 specification)

Analog interface:

- 2x12-bit SAR ADC, up to 20 channels

- 1x temperature sensor

-14x capacitive GPIO sensor

Timer:

- 4x54-bit general timer

- 1×52-bit system timer

- 3×watchdog timer

Product dimensions: 57 mm × 28 mm